BlueGold® Fusion Compost Vegetative Garden Fertilizer (NPK Fertilizer Paste 10-11-7)

By itself, BlueGold® Fusion Compost Vegetative will never cause burning. Do NOT combine with pesticides/chemicals/plant cleaners/etc. BlueGold® Fusion Compost Vegetative magnifies anything it touches and greatly enhances nutrient uptake. All BlueGold® Solutions have the ability to magnify anything they are mixed with or come into contact within the soil, water, or on plant leaf surfaces. Very recent (months prior) or current use of chemicals like fertilizers, herbicides, fungicides, algaecides, bactericides, miticides, pesticides, biocides, fumigants, plant growth regulators, pH Up/Down chemicals, dyes, etc., – all can cause an unfavorable interaction due to the BlueGold® Solution magnifying the strength of said chemical. Strengthened doses of those chemicals can result in direct stress, burning, or death of plants. BlueGold® Solutions by themselves, without chemical interactions, will never cause these issues in any plant or soil (when used as directed). Users must respect BlueGold® labels and reduce NPK/synthetic inputs by +/- 90%. If by user choice, against our directions/recommendations, to use chemical inputs by combining with BlueGold®, they must be reduced by 90% or more. If you quickly move the pH to 6.4 with the help of pH adjusters, without adjusting inputs, you’re drastically making inputs more available, which results in stressed, burned, or dead plants from too big of a hit from the nutrients that are now available at a much higher % than previously. Especially when all the excess stored up chemicals inputs, flood into the plants at even higher EC/PPM values. Likewise, if you do not adjust inputs while using BlueGold®, as soil/sap pH is driven to 6.4, the same can happen over an extended period depending on soil and watering conditions. We do not advocate mixing BlueGold® with any chemicals. This all only applies to chemical-based products and does not apply to organic-based products except for humic and fulvic acids as they are already in the BlueGold®. If you feel you need more, then start at a reduced rate of 90% and test on a few plants first. If you have sprayed or applied granular chemicals to your plants/soil previously/currently we suggest the following steps: 1) Hose the plants/soil down with clean water at least 3 separate times and 2) use the foliar rate below of BlueGold® Hydro at 90% less of the recommended BlueGold® foliar base rate application for the first 3-4 applications. For example, rather than use 1 tbsp (15 mL) per 1 gallon of foliar spray to start your foliar sprays (as directed on label); instead, begin with a ½ teaspoon (2.5 mL) per 1 gallon of foliar spray. Also, for the root soak reduce to a ¼ tsp per 5-gallon bucket of water to root drench (water) the plants for 3 to 4 watering’s before using the regular rates of 1 to 2 mL per gallon of water. Best used with non-city or chemically treated water sources. Best if RO, distilled, or rain/spring water is used. BlueGold® works and works very well in all organic situations with no side effects. If you encounter problems in the plants from the chemicals by your choice, then STOP.

This is a very powerful NPK. Always err on the side of caution and use lesser rates on initial use. BlueGold® Fusion Compost Vegetative is designed for root zone feedings (soil waterings) and only recommended in foliar spray applications if you have experience in growing with PPMs. Zone feedings go a very long way; more is not always better. It is always best to feed roots with Fusion Compost Vegetative (with Flower Power) first then follow with foliar (recommended Garden Blend and Super Carb) 15 minutes later.

ROOT ZONE (SOIL WATERING / FERTIGATION): 1 tbsp (15 mL) to 5/gallon or heavy 1/2 tsp (3 mL) to 1/gallon – maximum 2x per week
Always test soil moisture with a finger before watering. If the soil sticks to your finger there is no need to water. If using Soil Moisture Meter water at 27% – do not exceed 33%. BlueGold® Solutions make water penetrate deeper/broader reducing watering requirement needs. Hot/Dry/Cold/Wet zones may require +/- waterings.

INDOOR GROW ROOT ZONE: 550 – 650 PPM (use clean water)
Fusion Compost Vegetative PPMs can bloom up in the tank depending on water quality. Always test a small batch prior to VEG feedings.

INDOOR FOLIAR SPRAY: ONLY IF YOU GROW WITH PPMS – 100 – 200 PPM (use clean water)
Fusion Compost Flower PPMs can bloom up in the tank depending on water quality. Always test a small batch prior to Flower feedings.

DWC: 1-2 mL per 10-20 gallons of the reservoir (depending on your water source)
Follow the PPM of the mL rate you start with and maintain it – build or lower from there. Reservoir temperatures should not exceed 72°F at all times.

CLONE STARTS: 200 – 250 PPM (when clones spark roots adjust up to 500 – 650 PPM)
Follow the PPM of the mL rate you start with and maintain it – build or lower from there. Reservoir temperatures should not exceed 72°F at all times.

LAWN/TURF: 3 – 5 tbsp in 32oz Hose End Sprayer (let sit for 24 hours – feed on 1 – 3 tbsp setting)

BLOOMING INSTRUCTIONS:
Fusion Composts are potent in concentrate form. PLEASE err on the side of caution. Indoor/Outdoor Grows can stretch this super-concentrate paste for greater use. Depending on your water you may get 2-9 feeds out of one mix tank. The paste will bloom nutrients (higher PPM) biologically as the container sits over time. Fill the container to 50% +/- with water, add paste to desired PPM/EC, cover, and let sit 24 hrs. +/-. The PPM/EC will bloom up. Now add water to back down the PPM/EC to the desired feed level and then feed. Add clean water back to bloom tank level again. Let sit again and repeat the process until the feed tank PPM is gone. The container may smell but will not hurt any plant(s); this is a beneficial biological reaction. Start off with 1-2 tablespoon per 2-5 gallons of water for root/zone feeding the plants. For best results always root feed when the zone dries out or when they need watering and foliar feed the plants after you root feed with any BlueGold® Wetting Agent (Hydro, Garden Blend, Rose Blend, Vibrant Floral). Your strain(s) may require less or more PPM/EC of paste. The more you feed the product, the more explosive growth you will see happen. So start small then dial up the feed amounts to the optimum PPM/EC. As always, please call Customer Support (1-307-275-7010) with any questions or concerns before guessing, to achieve those Amazing Results that you desire.

Helpful Hints and Suggestions: For more information please call us on 1-307-275-7010 or email office@edenbluegold.com.

• Fusion Compost Vegetative is water soluble; it is also in a paste form. It needs to be broken up. This paste form is superior to a granular and saves filtration headaches. Before mixing into a reservoir, or spray tank or bottle we find it very useful to premix in a 5-gallon bucket or separate container with a little bit of water. Agitate with good stirring action, and then dump into your tank, then fill the remaining portion of the protocol up with water (and nutrients) as needed. Generally, we find that by putting in the Fusion Compost Vegetative first, the water hose is enough agitation to mix up the product when filling to your water line.
• By itself, Fusion Compost Vegetative will never cause burning. If you are currently using or have used in the past (up to 1 year) any foliar / zone chemicals / synthetics use lesser rates on initial use as Fusion Compost Vegetative maximizes anything it touches and makes everything more available. You do not want an excess of the chemicals/synthetics to rush into your plant(s).
• Apply in heat, cold, rain, sun, shade with a sprayer. We recommend a 32oz Hose End Sprayer set at 3 tbsp / 3oz setting at any time, even evenings, but early AM is best when dew is still on the leaves.
• Keep soil/sap pH at 6.4 in vegetative for best growth. BlueGold® will gradually move the soil/plant sap pH towards 6.4. At this level of pH, all soil-stored and new nutrients become the most available into the plants. If you quickly move the pH to 6.4 with help of pH adjusters, without adjusting inputs, you’re drastically making inputs more available, which results in stressed, burned, or dead plants from too big of a hit from the nutrients that are now available at a much higher % than previously. Especially when all the excess stored up chemicals inputs, flood into the plants at even higher EC/PPM values. Likewise, if you do not reduce inputs +/- 90% while using Fusion Compost Vegetative, as soil/sap pH is driven to 6.4, the same can happen over an extended period depending on soil and watering conditions. Fusion Compost Vegetative is a very dense micro/macronutrient product. There is a lot for pH adjusting solutions to interact with. A good thing to do is to do a test in a 5-gallon bucket before implementing. In this way, you can find out your needed pH adjusting rates and then carry that over to your reservoir or spray tank. It is always best to adjust the pH first of clean water in a clean tank. Then add the Fusion Compost Vegetative followed by other nutrients. We have found the perfect pH to be 6.4. We have non-caustic pH Up and Down Solutions as well.​
• It is best used with non-city or chemically treated water sources optimally RO, distilled, or rain/spring water is used.
• Fusion Compost Vegetative causes extreme root growth, caution with plastic/cloth pots because root bounding causes plant stress.
• The leftover mix is good for 30 days. Store in a cool dark place with a loose lid.